TILT AND TELESCOPIC MANUAL SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL TILT AND TELESCOPIC SWITCH

    A004OU3

    1. Attach the claw to install the switch.

    2. Connect the switch connector.

  2. INSTALL STEERING COLUMN COVER

    Note

    If the steering column cover is installed in an incorrect order, it will not be possible to assemble the steering column cover.


    1. A004PEC

      Attach the claw and 2 pins to install the upper steering column cover.

    2. A004NPY

      Attach the 2 claws to install the lower steering column cover.

    3. A004RPS

      Attach the 4 claws.

    4. A004O2T

      Attach the claw.

      Tech Tips

      Press the area around the claw to attach it.

  3. INSTALL LOWER NO. 2 STEERING COLUMN COVER

    A004MQH

    1. Attach the 4 claws to install the lower No. 2 steering column cover.