MULTIPLEX TILT AND TELESCOPIC ECU INSTALLATION

PROCEDURE

1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU

   
   

   1. 

      Install the multiplex tilt and telescopic ECU to the steering column assembly with the nut.

      Torque:

      25 N*m  { 255 kgf*cm, 18 in.*lbf }

   2. Connect the wire harness clamp and 2 connectors.

2. INSTALL STEERING COLUMN COVER

   Click here

3. INSTALL LOWER NO. 2 STEERING COLUMN COVER

   Click here

4. INSTALL STEERING WHEEL ASSEMBLY

   Click here