STEERING COLUMN ASSEMBLY(for Power Tilt and Power Telescopic Steering Column) INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL NO. 2 STEERING INTERMEDIATE SHAFT ASSEMBLY

   Click here

2. INSTALL STEERING COLUMN PROTECTOR (for Manual Transaxle RHD)

   Click here

3. INSTALL STEERING COLUMN ASSEMBLY

   
   

   1. 

      Text in Illustration

      *1	Collar
      *2	Bushing

      Check that the 2 bushings are securely installed to the steering column assembly.

      Tech Tips

      If the bushings are missing or damaged, replace the steering column assembly with a new one.

   2. 

      Install the steering column assembly with the bolt and 2 nuts.

      Torque:

      for nut

      25 N*m  { 255 kgf*cm, 18 ft.*lbf }

      for bolt

      36 N*m  { 367 kgf*cm, 27 ft.*lbf }

      Note

      
      

      • Do not damage the 2 bushings.

      • Do not line-up the bolt hole by prying on the collar or bushings. Only install the bolt straight, without applying any force to the bushings.

   3. Connect the connectors and attach the wire harness clamps to the steering column assembly and multiplex tilt and telescopic ECU.

   4. Install the multiplex tilt and telescopic ECU to the steering to the steering column assembly with the nut.

      Torque:

      25 N*m  { 255 kgf*cm, 18 ft.*lbf }

4. INSTALL POWER STEERING ECU ASSEMBLY (for LHD)

   Click here

5. INSTALL POWER STEERING ECU ASSEMBLY (for RHD)

   Click here

6. PLACE FRONT WHEELS FACING STRAIGHT AHEAD

7. CONNECT NO. 2 STEERING INTERMEDIATE SHAFT ASSEMBLY

   Click here

8. INSTALL BRAKE PEDAL SUPPORT SUB-ASSEMBLY

   Click here

9. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

   
   

   1. Install the lower No. 1 instrument panel airbag assembly Click here.

10. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

    
    

    1. Install the upper instrument panel sub-assembly Click here.

11. INSTALL COLUMN HOLE COVER SILENCER SHEET

    Click here

12. INSTALL COMBINATION SWITCH ASSEMBLY WITH SPIRAL CABLE SUB-ASSEMBLY

    
    
    1. 

       Text in Illustration

       *1	Clamp
       *2	Claw

       Using pliers, pinch the clamp and attach the claw to install the combination switch assembly with spiral cable sub-assembly to the steering column assembly.

    2. Connect the connectors to the combination switch assembly with spiral cable sub-assembly.

13. INSTALL UPPER STEERING COLUMN COVER

    Note

    If the steering column cover is installed in an incorrect order, it will not be possible to assemble the steering column cover.

    
    

    1. 

       Attach the claw and 2 pins to install the upper steering column cover.

14. INSTALL LOWER STEERING COLUMN COVER

    Note

    If the steering column cover is installed in an incorrect order, it will not be possible to assemble the steering column cover.

    
    

    1. 

       Attach the 2 claws to install the lower steering column cover.

    2. 

       Attach the 4 claws.

    3. 

       Attach the claw.

       Tech Tips

       Press the area around the claw to attach it.

15. INSTALL LOWER NO. 2 STEERING COLUMN COVER

    

    
    

    1. Attach the 4 claws to install the lower No. 2 steering column cover.

16. ADJUST SPIRAL CABLE

    Click here

17. INSTALL STEERING WHEEL ASSEMBLY

    Click here

18. INSTALL STEERING PAD

    Click here

19. INSPECT STEERING WHEEL CENTER POINT

20. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    
    

    • Reset the Autoaway/Return function setting to the previous condition by changing the customize parameter Click here.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

21. INITIALIZE ROTATION ANGLE SENSOR AND CALIBRATE TORQUE SENSOR ZERO POINT

    
    

    1. Initialize the rotation angle sensor and calibrate the torque sensor zero point Click here.

22. INSPECT SRS WARNING LIGHT

    
    

    1. Inspect the SRS warning light Click here.