POWER STEERING ECU(for RHD) INSTALLATION

PROCEDURE


  1. PRECAUTION

    CAUTION:

    Be sure to read Precaution thoroughly before servicing Click here.

  2. INSTALL POWER STEERING ECU ASSEMBLY


    1. A004MSI

      Install the power steering ECU assembly with the bolt and 2 nuts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }
    2. A004NB3

      Connect the 3 connectors to the power steering ECU assembly.

    3. A004ORV

      Connect the connector to the power steering ECU assembly.


      1. As shown in the illustration, return the lock lever to its original position to connect the connector and securely push in the lock of the lock lever.

    4. Attach the wire harness clamp to the power steering ECU assembly.

  3. INSTALL UPPER INSTRUMENT PANEL

    Tech Tips

    Refer to the instructions for installation of the upper instrument panel Click here.

  4. INITIALIZE ROTATION ANGLE SENSOR AND CALIBRATE TORQUE SENSOR ZERO POINT


    1. Initialize the rotation angle sensor and calibrate the torque sensor zero point Click here.