ELECTRIC PARKING BRAKE SWITCH INSTALLATION

PROCEDURE


  1. INSTALL ELECTRIC PARKING BRAKE SWITCH ASSEMBLY


    1. Connect the connector.

    2. A004NOBE02
      Text in Illustration
      *A for LHD
      *B for RHD

      Install the electric parking brake switch with the 3 bolts.

      Torque:
      7.1 N*m  { 72 kgf*cm, 62 in.*lbf }

  2. INSTALL INSTRUMENT PANEL FINISH PANEL END RH (for RHD)

    Click here

  3. INSTALL INSTRUMENT PANEL FINISH PANEL END LH (for LHD)

    Click here

  4. INSTALL NO. 3 BOX PANEL (w/ Console Box Lid)

    Click here

  5. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL (for RHD)

    Click here

  6. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL (for LHD)

    Click here

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.