ELECTRIC PARKING BRAKE SWITCH REMOVAL

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note


    • w/ Navigation System for HDD:

      After the ignition switch is turned off, the HDD navigation system requires approximately a minute to record various types of memory and settings. As a result, after turning the ignition switch off, wait a minute or more before disconnecting the cable from the negative (-) battery terminal.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL (for LHD)

    Click here

  3. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL (for RHD)

    Click here

  4. REMOVE NO. 3 BOX PANEL (w/ Console Box Lid)

    Click here

  5. REMOVE INSTRUMENT PANEL FINISH PANEL END LH (for LHD)

    Click here

  6. REMOVE INSTRUMENT PANEL FINISH PANEL END RH (for RHD)

    Click here

  7. REMOVE ELECTRIC PARKING BRAKE SWITCH ASSEMBLY


    1. A004NOBE02
      Text in Illustration
      *A for LHD
      *B for RHD

      Remove the 3 bolts and electric parking brake switch.