SKID CONTROL BUZZER REMOVAL

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY


    1. Remove the upper instrument panel sub-assembly Click here.

  3. REMOVE SKID CONTROL BUZZER ASSEMBLY


    1. A004QZO

      Detach the clamp and remove the buzzer.

    2. Disconnect the buzzer connector.