ACCELERATOR PEDAL INSTALLATION

PROCEDURE


  1. INSTALL ACCELERATOR PEDAL ROD

    Note


    • Be careful not to drop the accelerator pedal rod.

    • Do not disassemble the accelerator pedal rod.

    • This accelerator pedal does not require lubrication.

      Do not apply oil or lubricant to the accelerator pedal sensor assembly.

      If applied, the accelerator pedal rod must be replaced.


    1. A004PADE01
      *1 for LHD:
      *2 for RHD:

      Install the accelerator pedal rod with the 2 bolts.

      Torque:
      8.7 N*m  { 89 kgf*cm, 77 ft.*lbf }

    2. Connect the accelerator pedal position sensor connector.