CRANKSHAFT POSITION SENSOR INSTALLATION

PROCEDURE


  1. INSTALL CRANKSHAFT POSITION SENSOR


    1. A004TP2

      Apply a light coat of engine oil to the O-ring of the sensor.

    2. A004TAW

      Install the sensor with the bolt.

      Torque:
      8.8 N*m  { 90 kgf*cm, 78 in.*lbf }

    3. Connect the sensor wire harness clamp.

    4. Connect the sensor connector to the bracket.

    5. Connect the sensor connector.

  2. INSTALL GENERATOR ASSEMBLY


    1. Install the generator assembly Click here.