BACK DOOR GARNISH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

A bolt without a torque specification in shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL BACK DOOR OPENER SWITCH ASSEMBLY

    Click here

  2. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY


    1. Attach the 13 clips to install the back door outside garnish sub-assembly.

    2. Install the 4 nuts.

    3. Install the 4 bolts.

  3. INSTALL REAR LIGHT ASSEMBLY LH

    Click here

  4. INSTALL REAR LIGHT ASSEMBLY RH

    Click here

  5. INSTALL BACK DOOR TRIM BOARD ASSEMBLY

    Click here

  6. INSTALL BACK DOOR SIDE GARNISH LH

    Click here

  7. INSTALL BACK DOOR SIDE GARNISH RH

    Click here

  8. INSTALL UPPER BACK DOOR TRIM PANEL ASSEMBLY

    Click here