BACK DOOR GARNISH REASSEMBLY

PROCEDURE


  1. INSTALL BACK DOOR GARNISH MOULDING PROTECTOR LH

    Tech Tips

    When installing the back door garnish moulding protector LH, heat the back door outside garnish sub-assembly surface using a heat light.

    Standard
    Item Temperature
    Back Door Outside Garnish Sub-assembly 20 to 30°C (68 to 86°F)

    Note

    Do not heat the back door outside garnish sub-assembly excessively.


    1. Clean the back door outside garnish sub-assembly surface.


      1. Using a heat light, heat the back door outside garnish sub-assembly surface.

      2. Remove the double-sided tape from the back door outside garnish sub-assembly surface.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new back door garnish moulding protector LH.


      1. Using a heat light, heat the back door outside garnish sub-assembly.

      2. Remove the peeling paper from the face of the back door garnish moulding protector LH.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. A005460

        Install the back door garnish moulding protector LH as shown in the illustration.

  2. INSTALL BACK DOOR GARNISH MOULDING PROTECTOR RH

    Tech Tips

    Use the same procedure described for the LH side.

  3. INSTALL BACK DOOR OUTSIDE GARNISH PROTECTOR

    Tech Tips

    When installing the back door outside garnish protector, heat the back door outside garnish sub-assembly surface using a heat light.

    Standard
    Item Temperature
    Back Door Outside Garnish Sub-assembly 20 to 30°C (68 to 86°F)

    Note

    Do not heat the back door outside garnish sub-assembly excessively.


    1. Clean the back door outside garnish sub-assembly surface.


      1. Using a heat light, heat the back door outside garnish sub-assembly surface.

      2. Remove the double-sided tape from the back door outside garnish sub-assembly surface.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new back door outside garnish protector.


      1. Using a heat light, heat the back door outside garnish sub-assembly.

      2. Remove the peeling paper from the face of the back door outside garnish protector.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. A0055S6

        Install the back door outside garnish protector as shown in the illustration.

  4. INSTALL UPPER BACK DOOR GARNISH MOULDING PROTECTOR

    Tech Tips


    • When installing the upper back door garnish moulding protector, heat the back door outside garnish sub-assembly surface using a heat light.

    • Use the same procedure for both upper back door outside moulding protectors.

    Standard
    Item Temperature
    Back Door Outside Garnish Sub-assembly 20 to 30°C (68 to 86°F)

    Note

    Do not heat the back door outside garnish sub-assembly excessively.


    1. Clean the back door outside garnish sub-assembly surface.


      1. Using a heat light, heat the back door outside garnish sub-assembly surface.

      2. Remove the double-sided tape from the back door outside garnish sub-assembly surface.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new upper back door outside moulding protector.


      1. Using a heat light, heat the back door outside garnish sub-assembly.

      2. Remove the peeling paper from the face of the upper back door outside moulding protector.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. A0058W0

        Install the upper back door outside moulding protector as shown in the illustration.

  5. INSTALL UPPER BACK DOOR OUTSIDE GARNISH LH


    1. Attach the 5 claws and 2 guides to install the upper back door outside garnish LH.

  6. INSTALL UPPER BACK DOOR OUTSIDE GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  7. INSTALL NO. 2 BACK DOOR OUTSIDE GARNISH (w/o Rear View Monitor System)


    1. Attach the 2 claws to install the No. 2 back door outside garnish.

  8. INSTALL SYMBOL EMBLEM

    Click here