BACK DOOR GARNISH REMOVAL

PROCEDURE


  1. REMOVE UPPER BACK DOOR TRIM PANEL ASSEMBLY

    Click here

  2. REMOVE BACK DOOR SIDE GARNISH LH

    Click here

  3. REMOVE BACK DOOR SIDE GARNISH RH

    Click here

  4. REMOVE BACK DOOR TRIM BOARD ASSEMBLY

    Click here

  5. REMOVE REAR LIGHT ASSEMBLY LH

    Click here

  6. REMOVE REAR LIGHT ASSEMBLY RH

    Click here

  7. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY


    1. A0057J0

      Remove the 4 nuts.

    2. Remove the 4 bolts.

    3. A0057NGE02
      Text in Illustration
      *a Protective Tape

      Put protective tape around the back door outside garnish sub-assembly.

    4. A00578SE01
      Text in Illustration
      *a Protective Tape

      Using a clip remover, detach the clip.

      Note

      Do not damage the back door outside garnish sub-assembly.

      Tech Tips


      • Tape the clip remover tip before use.

      • Use the same procedure for the other side.

    5. A0058PKE01
      Text in Illustration
      *a Protective Tape

      Using a clip remover, detach the clip.

      Note

      Do not damage the back door outside garnish sub-assembly.

      Tech Tips


      • Tape the clip remover tip before use.

      • Use the same procedure for the other side.

    6. A0057HIE01

      Detach the 2 clips in the order shown in the illustration.

      Text in Illustration
      A0054DN Remove in this Direction
    7. A0058RBE03

      Detach the 5 clips in the order shown in the illustration and remove the back door outside garnish sub-assembly.

      Text in Illustration
      A0054DN Remove in this Direction

    8. Remove the protective tape.

  8. REMOVE BACK DOOR OPENER SWITCH ASSEMBLY

    Click here