ROOF DRIP SIDE FINISH MOULDING(for Sedan) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the RH side and LH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. REMOVE CENTER ROOF DRIP SIDE FINISH MOULDING LH


    1. Put protective tape around the center roof drip side finish moulding.

    2. Using a moulding remover, detach the 2 clips and remove the center roof drip side finish moulding.

      Note

      When removing the center roof drip side finish moulding, be careful not to damage the clips.

      A00586KE01
      Text in Illustration
      *1 Protective Tape - -