ROCKER PANEL MOULDING INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL BODY ROCKER PANEL MOULDING ASSEMBLY LH


    1. Attach the 8 clips to install the body rocker panel moulding assembly LH.

    2. Install the 2 screws.

    3. Install a new grommet.

    4. Install the 7 retainers.

    5. Install the 3 screws.

  2. INSTALL REAR WHEEL HOUSE FRONT PLATE LH


    1. A0053F6

      Attach the guide to install the rear wheel house front plate LH as shown in the illustration.

    2. Install the clip.

    3. Install the 2 screws.