ROCKER PANEL MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR WHEEL HOUSE FRONT PLATE LH


    1. A0052KJ

      Remove the 2 screws.

    2. A00580Y

      Remove the clip.

    3. Detach the guide and remove the rear wheel house front plate LH as shown in the illustration.

  2. REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY LH


    1. Remove the 3 screws.

      A0059F7E02
      Text in Illustration
      *1 Grommet *2 Retainer

    2. Remove the 7 retainers.

    3. Using a thin-bladed screwdriver, remove the grommet.

    4. A00541Q

      Remove the 2 screws.

    5. A00570VE02
      Text in Illustration
      *a Protective Tape

      Put protective tape around the body rocker panel moulding assembly LH.

    6. Detach the 8 clips and remove the body rocker panel moulding assembly LH.

      A0057AA