RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. REMOVE HEADLIGHT RELAY


    1. A0056TB

      Remove the headlight relay from the engine room relay box.

  2. INSPECT HEADLIGHT RELAY


    1. A00574UE02

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
      Battery voltage applied to terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the headlight relay.

  3. INSTALL HEADLIGHT RELAY


    1. Install the headlight relay to the engine room relay box.

  4. REMOVE FOG LIGHT RELAY


    1. A0056VP

      Remove the air conditioning control assembly Click here.

    2. Remove the fog light relay from the No. 4 relay box.

  5. INSPECT FOG LIGHT RELAY


    1. A0058WKE31

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
      Battery voltage applied to terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the fog light relay.

  6. INSTALL FOG LIGHT RELAY


    1. Install the fog light relay to the No. 4 relay box.

    2. Install the air conditioning control assembly Click here.

  7. REMOVE REAR FOG LIGHT RELAY


    1. A00554O

      Remove the air conditioning control assembly Click here.

    2. Remove the fog light relay from the No. 3 relay box.

  8. INSPECT REAR FOG LIGHT RELAY


    1. A0058WKE31

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
      Battery voltage applied to terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the rear fog light relay.

  9. INSTALL REAR FOG LIGHT RELAY


    1. Install the fog light relay to the No. 3 relay box.

    2. Install the air conditioning control assembly Click here.