HEADLIGHT LEVELING ECU(for RHD) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  4. REMOVE HEADLIGHT LEVELING ECU ASSEMBLY


    1. A0052ZU

      Disconnect the connector.

    2. Remove the bolt and headlight leveling ECU assembly.