AUTOMATIC LIGHT CONTROL SENSOR INSTALLATION

PROCEDURE


  1. INSTALL RAIN SENSOR


    1. Clean the installation surface of the rain sensor on the windshield glass.

    2. When replacing the rain sensor with a new one:

      Remove the protective cover on the rain sensor.

      Note

      Do not touch the silicon mixture directly with a finger.

    3. A0054DT

      Connect the connector.

      Note

      Do not touch the silicon mixture directly with a finger.

    4. A00578D

      Attach the 2 claws to install the rain sensor.

      Note

      Be careful that air bubbles do not enter between the silicon mixture and windshield glass.

  2. INSTALL NO. 2 RAIN SENSOR COVER


    1. A005346

      Using a screwdriver, attach the 2 claws to install the No. 2 rain sensor cover.

  3. INSTALL NO. 1 RAIN SENSOR COVER


    1. A0055JE

      Attach the 3 claws to install the No. 1 rain sensor cover.