AFS OFF SWITCH INSPECTION

PROCEDURE


  1. INSPECT HEADLIGHT SWIVEL MAIN SWITCH


    1. A0053NXE10
      Text in Illustration
      *1

      Component without harness connected

      (Headlight Swivel Main Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      4 (MSW) - 1 (E) Headlight swivel main switch off 10 kΩ or higher
      Headlight swivel main switch on Below 1 Ω

    2. Apply battery voltage to the connector and check the LED illumination condition.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 3 (ILL+)

      Battery negative (-) → Terminal 2 (ILL-)

      		 LED illuminates

      If the result is not as specified, there may be a malfunction in the headlight swivel main switch.