HEADLIGHT LEVELING SWITCH(for RHD) INSPECTION

PROCEDURE


  1. INSPECT HEADLIGHT LEVELING SWITCH


    1. Connect the battery positive (+) lead to terminal 1 (B) and the negative (-) lead to terminal 4 (E).

    2. A005587E02
      Text in Illustration
      *1

      Component without harness connected

      (Headlight Leveling Switch)

      Measure the voltage according to the value(s) in the table below.

      Standard Voltage
      Tester Connection Switch Condition Specified Condition
      1 (B) - 2 (T) 0 9.48 to 10.2 V
      1 8.04 to 8.76 V
      2 6.6 to 7.32 V
      3 5.16 to 5.88 V
      4 3.72 to 4.44 V
      5 2.4 to 3.12 V

    3. Apply battery voltage to the connector and check the LED illumination condition.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 3 (ILL+)

      Battery negative (-) → Terminal 4 (E)

      		 LED illuminates

      If the result is not as specified, replace the headlight leveling switch.