REAR LIGHT ASSEMBLY(for Sedan) INSPECTION

PROCEDURE


  1. INSPECT REAR LIGHT ASSEMBLY LH


    1. A0052QUE01
      Text in Illustration
      *a

      Component without harness connected

      (Rear Light Assembly LH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → G55-3 (B)

      Battery negative (-) → G55-1 (E)

      		 Illuminates

      If the result is not as specified, replace the rear light assembly LH.

  2. INSPECT REAR LIGHT ASSEMBLY RH


    1. A0052XEE01
      Text in Illustration
      *a

      Component without harness connected

      (Rear Light Assembly RH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → G54-3 (B)

      Battery negative (-) → G54-1 (E)

      		 Illuminates

      If the result is not as specified, replace the rear light assembly RH.