REAR COMBINATION LIGHT ASSEMBLY(for Wagon) INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH

   
   

   1. 

      Attach the guide to set the rear combination light assembly LH in place.

   2. Install the 3 nuts.

   3. Connect the connector and attach the wire harness clamp.

2. CONNECT DECK TRIM SIDE PANEL ASSEMBLY LH

   
   

   1. Connect the luggage compartment trim cover assembly LH Click here.

3. INSTALL FRONT DECK FLOOR BOX

   Click here

4. INSTALL REAR FLOOR FINISH PLATE

   Click here

5. INSTALL DECK FLOOR BOX LH

   Click here

6. INSTALL DECK FLOOR BOX RH

   Click here

7. INSTALL ROPE HOOK ASSEMBLY (w/o Deck Rail)

   Click here

8. INSTALL NO. 6 DECK SIDE TRIM COVER (w/o Deck Rail)

   Click here

9. INSTALL NO. 5 DECK SIDE TRIM COVER (w/o Deck Rail)

   Click here

10. INSTALL NO. 2 DECK SIDE TRIM COVER (w/o Deck Rail)

    Click here

11. INSTALL NO. 1 DECK SIDE TRIM COVER (w/o Deck Rail)

    Click here

12. INSTALL FLOOR SIDE RAIL LH (w/ Deck Rail)

    Click here

13. INSTALL FLOOR SIDE RAIL RH (w/ Deck Rail)

    Click here

14. INSTALL REAR DECK FLOOR BOX

    Click here

15. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY

    Click here

16. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY

    Click here

17. INSTALL DECK BOARD SUB-ASSEMBLY

    Click here

18. INSTALL DECK BOARD ASSEMBLY

    Click here

19. INSTALL LOWER DECK TRIM SIDE BOARD LH (w/ Partition Board)

    Click here

20. INSTALL LOWER DECK TRIM SIDE BOARD RH (w/ Partition Board)

    Click here

21. INSTALL ROOM PARTITION NET ASSEMBLY (w/ Partition Net)

    Click here

22. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here