REAR COMBINATION LIGHT ASSEMBLY(for Wagon) INSPECTION

PROCEDURE


  1. INSPECT REAR COMBINATION LIGHT ASSEMBLY LH


    1. A0052QPE02
      Text in Illustration
      *a

      Component without harness connected

      (Rear Combination Light Assembly LH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → G6-1 (B)

      Battery negative (-) → G6-4 (E)

      		 Taillight illuminates

      Battery positive (+) → G6-2 (B)

      Battery negative (-) → G6-4 (E)

      		 Stop light illuminates

      If the result is not as specified, replace the rear combination light assembly LH.

  2. INSPECT REAR COMBINATION LIGHT ASSEMBLY RH


    1. A00556RE02
      Text in Illustration
      *a

      Component without harness connected

      (Rear Combination Light Assembly RH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → G5-1 (B)

      Battery negative (-) → G5-4 (E)

      		 Taillight illuminates

      Battery positive (+) → G5-2 (B)

      Battery negative (-) → G5-4 (E)

      		 Stop light illuminates

      If the result is not as specified, replace the rear combination light assembly RH.