REAR COMBINATION LIGHT ASSEMBLY(for Wagon) REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

   Click here

2. REMOVE ROOM PARTITION NET ASSEMBLY (w/ Partition Net)

   Click here

3. REMOVE LOWER DECK TRIM SIDE BOARD LH (w/ Partition Board)

   Click here

4. REMOVE LOWER DECK TRIM SIDE BOARD RH (w/ Partition Board)

   Click here

5. REMOVE DECK BOARD ASSEMBLY

   Click here

6. REMOVE DECK BOARD SUB-ASSEMBLY

   Click here

7. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY

   Click here

8. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY

   Click here

9. REMOVE REAR DECK FLOOR BOX

   Click here

10. REMOVE FLOOR SIDE RAIL LH (w/ Deck Rail)

    Click here

11. REMOVE FLOOR SIDE RAIL RH (w/ Deck Rail)

    Click here

12. REMOVE NO. 2 DECK SIDE TRIM COVER (w/o Deck Rail)

    Click here

13. REMOVE NO. 1 DECK SIDE TRIM COVER (w/o Deck Rail)

    Click here

14. REMOVE NO. 6 DECK SIDE TRIM COVER (w/o Deck Rail)

    Click here

15. REMOVE NO. 5 DECK SIDE TRIM COVER (w/o Deck Rail)

    Click here

16. REMOVE ROPE HOOK ASSEMBLY (w/o Deck Rail)

    Click here

17. REMOVE DECK FLOOR BOX LH

    Click here

18. REMOVE DECK FLOOR BOX RH

    Click here

19. REMOVE REAR FLOOR FINISH PLATE

    Click here

20. REMOVE FRONT DECK FLOOR BOX

    Click here

21. DISCONNECT DECK TRIM SIDE PANEL ASSEMBLY LH

    
    

    1. Disconnect the rear side of the luggage compartment trim cover assembly LH so that the nut of the rear combination light assembly LH can be removed Click here.

22. REMOVE REAR COMBINATION LIGHT ASSEMBLY LH

    
    

    1. 

       Disconnect the connector and detach the wire harness clamp.

    2. 

       Put protective tape around the rear combination light assembly LH.

       Text in Illustration

       Protective Tape

    3. Remove the 3 nuts.

    4. Pull the rear combination light assembly LH toward the rear of the vehicle to detach the guide to remove it.