REAR COMBINATION LIGHT ASSEMBLY(for Sedan) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL REAR COMBINATION LIGHT BULB HOLDER LH


    1. Connect the connector.

    2. Attach the 2 claws and clamp.

    3. Attach the guide to install the rear combination light bulb holder LH.

  2. INSTALL REAR TURN SIGNAL LIGHT BULB


    1. A0056D1

      Install the rear turn signal light bulb to the rear combination light bulb holder LH.

    2. Turn the rear combination light bulb holder LH in the direction indicated by the arrow in the illustration to install the socket.

  3. INSTALL REAR COMBINATION LIGHT BODY GASKET LH


    1. Install a new rear combination light body gasket LH.

  4. INSTALL REAR COMBINATION LIGHT LENS AND BODY LH


    1. Attach the clip to install the rear combination light lens and body LH.

    2. Install the 3 nuts.

    3. Connect the connector.

  5. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH

    Click here

  6. INSTALL REAR FLOOR FINISH PLATE

    Click here

  7. INSTALL ROPE HOOK ASSEMBLY

    Click here

  8. INSTALL REAR NO. 6 FLOOR BOARD SPACER

    Click here

  9. INSTALL REAR FLOOR BOARD SPACER

    Click here

  10. INSTALL LUGGAGE COMPARTMENT FLOOR CARPET

    Click here

  11. INSTALL REAR SIDE SEATBACK ASSEMBLY LH

    Click here

  12. INSTALL REAR BENCH TYPE SEAT CUSHION ASSEMBLY

    Click here