REAR COMBINATION LIGHT ASSEMBLY(for Sedan) REASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR TURN SIGNAL LIGHT BULB


    1. A0055TME02
      Text in Illustration
      *a Protrusion
      A0054DN Cutout

      Align the 2 protrusions on the rear turn signal light bulb with the 2 cutouts of the bulb socket and insert the bulb.

    2. A0052RH

      While pushing the rear turn signal light bulb, turn the bulb clockwise to install the bulb.

      Text in Illustration
      A0052FQ Clockwise
    3. A0056D1

      Insert and turn the bulb socket in the direction indicated by the arrow in the illustration to connect the bulb socket.

  2. REMOVE REAR COMBINATION LIGHT GASKET


    1. Install a new rear combination light gasket.