REAR COMBINATION LIGHT ASSEMBLY(for Sedan) INSPECTION

PROCEDURE


  1. INSPECT REAR COMBINATION LIGHT LENS AND BODY LH


    1. A0052GKE15
      Text in Illustration
      *1

      Component without harness connected

      (Rear Combination Light Lens and Body)

      Check the stop light.


      1. Apply battery voltage to the connector and check the LED illumination condition.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 2 (STOP)

        Battery negative (-) → 4 (E)

        		 LED illuminates

        If the result is not as specified, replace the rear combination light lens and body.

    2. A0052GKE16
      Text in Illustration
      *1

      Component without harness connected

      (Rear Combination Light Lens and Body)

      Check the taillight.


      1. Apply battery voltage to the connector and check the LED illumination condition.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 1 (TAIL)

        Battery negative (-) → 4 (E)

        		 LED illuminates

        If the result is not as specified, replace the rear combination light lens and body.

  2. INSPECT REAR COMBINATION LIGHT LENS AND BODY RH


    1. A0052GKE15
      Text in Illustration
      *1

      Component without harness connected

      (Rear Combination Light Lens and Body)

      Check the stop light.


      1. Apply battery voltage to the connector and check the LED illumination condition.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 2 (STOP)

        Battery negative (-) → 4 (E)

        		 LED illuminates

        If the result is not as specified, replace the rear combination light lens and body.

    2. A0052GKE16
      Text in Illustration
      *1

      Component without harness connected

      (Rear Combination Light Lens and Body)

      Check the taillight.


      1. Apply battery voltage to the connector and check the LED illumination condition.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 1 (TAIL)

        Battery negative (-) → 4 (E)

        		 LED illuminates

        If the result is not as specified, replace the rear combination light lens and body.