REAR COMBINATION LIGHT ASSEMBLY(for Sedan) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE LUGGAGE COMPARTMENT FLOOR CARPET

    Click here

  2. REMOVE REAR FLOOR BOARD SPACER

    Click here

  3. REMOVE REAR NO. 6 FLOOR BOARD SPACER

    Click here

  4. REMOVE ROPE HOOK ASSEMBLY

    Click here

  5. REMOVE REAR FLOOR FINISH PLATE

    Click here

  6. DISCONNECT LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH


    1. Disconnect the rear side of the luggage compartment trim cover assembly LH so that the nut of the rear combination light assembly LH can be removed Click here.

  7. REMOVE REAR COMBINATION LIGHT ASSEMBLY LH


    1. A0056KV

      Disconnect the connector and detach the wire harness clamp.

    2. A0059EN

      Put protective tape around the rear combination light assembly LH.

      Text in Illustration
      B0040QK Protective Tape

    3. Remove the 3 nuts.

    4. Pull the rear combination light assembly LH toward the rear of the vehicle to detach the guide to remove it.