HEADLIGHT ASSEMBLY(for HID Headlight) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Make sure that the headlight control ECU sub-assembly LH is not connected or hot before removing the headlight control ECU sub-assembly LH.

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE FRONT BUMPER COVER

    Click here

  4. REMOVE HEADLIGHT ASSEMBLY LH


    1. A0055P8E02
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the headlight assembly LH.

    2. Remove the 2 bolts and screw.

    3. Detach the claw and remove the headlight assembly LH.

    4. Disconnect the connectors.