HIGH INTENSITY DISCHARGE HEADLIGHT BULB REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Make sure that the No. 1 headlight back cover is not connected or hot before removing the No. 1 headlight back cover.

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE NO. 1 HEADLIGHT BACK COVER


    1. A0056AQ

      Disconnect the connector.

    2. Turn the No. 1 headlight back cover in the direction indicated by the arrow in the illustration and remove the No. 1 headlight back cover from the headlight unit LH.

      Note

      Make sure that the No. 1 headlight back cover is not connected or hot before removing the No. 1 headlight back cover.

    3. A0054XJ

      Turn the No. 1 headlight back cover socket in the direction indicated by the arrow and disconnect the No. 1 headlight back cover socket.

      Note

      Do not pull the No. 1 headlight back cover while the socket is connected.

  4. REMOVE DISCHARGE HEADLIGHT BULB


    1. A00594O

      Release the set spring lock as shown in the illustration and remove the discharge headlight bulb.

      Note

      Do not touch the glass part of the bulb.