DESCRIPTION
The headlight swivel ECU assembly*1 or headlight leveling ECU assembly*2 stores this DTC if initialization has not been performed after the ECU is replaced.
*1: w/ AFS
*2: w/o AFS
| DTC Code. | DTC Detection Condition | Trouble Area |
|---|---|---|
| B2450 |
|
|
CAUTION / NOTICE / HINT
Tech Tips
After replacing the headlight swivel ECU assembly*1 or headlight leveling ECU assembly*2, initialization of the ECU is necessary Click here.
*1: w/ AFS
*2: w/o AFS
PROCEDURE
CHECK VEHICLE TYPE
Check the vehicle type.
| Result | Proceed to |
|---|---|
| w/ AFS | A |
| w/o AFS | B |
| B |
|
PERFORM HEADLIGHT LEVELING ECU ASSEMBLY INITIALIZATION Click here |
| A |
|
PERFORM HEADLIGHT SWIVEL ECU ASSEMBLY INITIALIZATION
Perform initialization of the headlight swivel ECU assembly Click here.
| NEXT |
|
CHECK FOR DTC
Clear the DTCs Click here.
Check for DTCs Click here.
| OK |
|---|
| DTC B2450 output does not occur. |
Tech Tips
If the headlight swivel ECU assembly outputs DTC B2450 even though the ECU has been initialized, there may be a malfunction in the headlight swivel ECU.
| OK |
|
END |
| NG |
|
REPLACE HEADLIGHT SWIVEL ECU ASSEMBLY Click here |
PERFORM HEADLIGHT LEVELING ECU ASSEMBLY INITIALIZATION
Perform initialization of the headlight leveling ECU assembly Click here.
| NEXT |
|
CHECK FOR DTC
Clear the DTCs Click here.
Check for DTCs Click here.
Tech Tips
If the headlight leveling ECU assembly outputs DTC B2450 even though the ECU has been initialized, there may be a malfunction in the headlight leveling ECU.
| Result | Proceed to |
|---|---|
| OK | A |
| NG (for LHD) | B |
| NG (for RHD) | C |
| A |
|
END |
| B |
|
REPLACE HEADLIGHT LEVELING ECU ASSEMBLY Click here |
| C |
|
REPLACE HEADLIGHT LEVELING ECU ASSEMBLY Click here |