WASHER NOZZLE(for Front) ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT WASHER NOZZLE SUB-ASSEMBLY


    1. With the engine running, check the position that the washer fluid hits the windshield.

      OK
      Washer fluid hits the windshield in the area shown in the illustration.
      A0055SWE02
      Text in Illustration
      *1 Ceramic Line *2 Ceramic Line (Dot)
      *a Upper Limit *b Standard
      *c Lower Limit - -
      Standard
      Area Specified Condition Area Specified Condition
      A 339 mm (13.3464 in.) B 109 mm (4.2913 in.)
      C 228 mm (8.9764 in.) - -

      Note

      If the result is not as specified, replace the washer nozzle sub-assembly.