REAR WIPER MOTOR(for Wagon) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE UPPER BACK DOOR TRIM PANEL ASSEMBLY

    Click here

  4. REMOVE BACK DOOR SIDE GARNISH LH

    Click here

  5. REMOVE BACK DOOR SIDE GARNISH RH

    Click here

  6. REMOVE BACK DOOR TRIM BOARD ASSEMBLY

    Click here

  7. REMOVE REAR WIPER ARM


    1. A0058JQ

      Open the wiper arm head cap.

    2. A0052H8

      Remove the nut and rear wiper arm.

  8. REMOVE REAR WIPER MOTOR ASSEMBLY


    1. A0056IO

      Disconnect the connector.

    2. Remove the 3 bolts and rear wiper motor assembly.

  9. REMOVE REAR WIPER MOTOR GROMMET


    1. A0053ZE

      Remove the wiper motor grommet.