OUTER REAR VIEW MIRROR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedures listed below are for the LH side.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY LH

    A0053OJ

    1. Install the outer rear view mirror assembly LH with the 3 nuts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    2. Attach the clamp.

    3. Connect the connector.

  2. INSTALL OUTER MIRROR INSTALL HOLE COVER LH

    Click here

  3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

    Click here

  4. INSTALL FRONT DOOR NO. 1 STIFFENER CUSHION

    Click here

  5. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

    Click here

  6. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

    Click here

  7. INSTALL ASSIST GRIP COVER LH

    Click here

  8. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH

    Click here