BACK DOOR SUPPORT REMOVAL

CAUTION / NOTICE / HINT

Note


  • Remove the back door support while holding the back door.

  • Do not touch the extendable portion of the rod to prevent foreign objects from attaching to the rod surface.

  • Do not push the rod sideways because the rod may bend.

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE BACK DOOR STAY ASSEMBLY LH


    1. A0052CSE02
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, remove the 2 stop rings as shown in the illustration, and then remove the back door stay.

      CAUTION:

      Remove the door stay while supporting the back door with one hand.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE BACK DOOR STAY BOLT


    1. A0055LX

      Remove the back door stay bolt.

  3. REMOVE UPPER BACK DOOR DAMPER STAY BRACKET LH


    1. A0057LB

      Remove the 2 bolts and upper back door damper stay bracket.