LUGGAGE DOOR HINGE TORSION BAR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • The installation should be performed in the order of RH to LH.

  • After installing the torsion bar, use your hand to open and close the luggage door. Make sure the luggage door opens and closes smoothly.

PROCEDURE


  1. INSTALL LUGGAGE COMPARTMENT DOOR TORSION BAR SUPPORT


    1. A00556M

      Install the luggage compartment door torsion bar support as shown in the illustration.

  2. INSTALL LUGGAGE DOOR HINGE TORSION BAR RH


    1. A0056HJE02
      Text in Illustration
      *1 Installation Hole
      *2

      Installation Hole

      (for Adjustment)

      Set the tip of the luggage door hinge torsion bar RH into the installation hole in the center. The upper and lower holes are used for adjustment.

    2. A0056GT

      Connect the luggage door hinge torsion bar RH to the body LH side.

    3. A0055YQE02

      Using SST, install the luggage door hinge torsion bar RH to the luggage door hinge and body RH side.

      SST
      09804-24010
    4. A0057LT

      Connect the luggage door hinge torsion bar RH to the luggage compartment door torsion bar support.

  3. INSTALL LUGGAGE DOOR HINGE TORSION BAR LH


    1. A005394E02
      Text in Illustration
      *1 Installation Hole
      *2

      Installation Hole

      (for Adjustment)

      Set the tip of the luggage door hinge torsion bar LH into the installation hole in the center. The upper and lower holes are used for adjustment.

    2. A0055JC

      Connect the luggage door hinge torsion bar LH to the body RH side.

    3. A0054JGE02

      Using SST, install the luggage door hinge torsion bar LH to the luggage door hinge and body LH side

      SST
      09804-24010
    4. A0056TJ

      Connect the luggage door hinge torsion bar LH to the luggage compartment door torsion bar support.

    5. A0052SK

      Attach the 2 claws to close the cover.

  4. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH


    1. A0054A4

      Pass the fuel lid opener cable through the trim cover.

    2. A0056VA

      Install the trim cover with the 4 clips.

  5. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH


    1. A0058H2E02
      *1 Slit

      Install the trim cover with the 4 clips.

  6. INSTALL REAR FLOOR FINISH PLATE


    1. A00551C

      Attach the 4 clips to install the rear floor finish plate.

    2. A0054RV

      Install the 2 clips.

  7. INSTALL ROPE HOOK ASSEMBLY


    1. A0055RW

      Install the 4 rope hooks with the 4 bolts.

      Torque:
      7.8 N*m  { 80 kgf*cm, 69 in.*lbf }

  8. INSTALL REAR FLOOR BOARD SPACER

    A0055Q0E05
    *1 for Full Size Spare Tire:
    *2 Except Full Size Spare Tire:

  9. INSTALL REAR NO. 6 FLOOR BOARD SPACER

    A0054STE04
    *1 for Full Size Spare Tire:
    *2 Except Full Size Spare Tire:

  10. INSTALL LUGGAGE COMPARTMENT FLOOR CARPET

    A0053WI

  11. INSTALL REAR SIDE SEATBACK ASSEMBLY LH

    Click here

  12. INSTALL REAR SIDE SEATBACK ASSEMBLY RH

    Click here

  13. INSTALL REAR BENCH TYPE SEAT CUSHION ASSEMBLY

    Click here