LUGGAGE COMPARTMENT DOOR ADJUSTMENT

CAUTION / NOTICE / HINT

A0054N4E01
*1 Centering Bolt
*2 Standard Bolt

Tech Tips


  • Centering bolts are used to mount the door hinge to the vehicle body and door. The door cannot be adjusted with the centering bolts on. Substitute the centering bolts with standard bolts (with washers) when making adjustments.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSPECT LUGGAGE COMPARTMENT DOOR PANEL SUB-ASSEMBLY


    1. Check that the clearance measurements of areas A to D are within the standard range.

      A0055MEE02
      Standard
      Area Specified Condition Area Specified Condition
      A 2.5 to 6.5 mm (0.0984 to 0.256 in.) C 2.9 to 5.9 mm (0.114 to 0.232 in.)
      B -2.0 to 2.0 mm (-0.0787 to 0.0787 in.) D 4.5 to 7.5 mm (0.177 to 0.295 in.)

  2. REMOVE ROPE HOOK ASSEMBLY

    Click here

  3. REMOVE REAR FLOOR FINISH PLATE

    Click here

  4. REMOVE BACK DOOR ASSIST GRIP

    Click here

  5. REMOVE DOOR ASSIST GRIP

    Click here

  6. REMOVE BACK DOOR TRIM COVER

    Click here

  7. REMOVE NO. 3 WIRING HARNESS PROTECTOR

    Click here

  8. REMOVE NO. 2 WIRING HARNESS PROTECTOR

    Click here

  9. ADJUST LUGGAGE COMPARTMENT DOOR PANEL SUB-ASSEMBLY


    1. A0054MW

      Horizontally and vertically adjust the door position by loosening the door side hinge bolts.

    2. Tighten the door side hinge bolts after the adjustment.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }
    3. A0058CF

      Remove the rear floor finish plate.

    4. Adjust the striker position by slightly loosening the striker mounting screws and hitting the striker with a plastic-faced hammer.

    5. Tighten the striker mounting screws after the adjustment.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

  10. INSTALL NO. 2 WIRING HARNESS PROTECTOR

    Click here

  11. INSTALL NO. 3 WIRING HARNESS PROTECTOR

    Click here

  12. INSTALL BACK DOOR TRIM COVER

    Click here

  13. INSTALL DOOR ASSIST GRIP

    Click here

  14. INSTALL BACK DOOR ASSIST GRIP

    Click here

  15. INSTALL REAR FLOOR FINISH PLATE

    Click here

  16. INSTALL ROPE HOOK ASSEMBLY

    Click here