QUARTER WINDOW GLASS(for Wagon) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR BENCH TYPE SEAT CUSHION ASSEMBLY

    Click here

  2. REMOVE REAR SIDE SEATBACK ASSEMBLY LH

    Click here

  3. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

  4. REMOVE ROOM PARTITION NET ASSEMBLY (w/ Partition Net)

    Click here

  5. REMOVE LOWER DECK TRIM SIDE BOARD LH (w/ Partition Board)

    Click here

  6. REMOVE LOWER DECK TRIM SIDE BOARD RH (w/ Partition Board)

    Click here

  7. REMOVE DECK BOARD ASSEMBLY

    Click here

  8. REMOVE DECK BOARD SUB-ASSEMBLY

    Click here

  9. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY

    Click here

  10. REMOVE REAR DECK FLOOR BOX

    Click here

  11. REMOVE FLOOR SIDE RAIL LH (w/ Deck Rail)

    Click here

  12. REMOVE NO. 2 DECK SIDE TRIM COVER (w/o Deck Rail)

    Click here

  13. REMOVE NO. 6 DECK SIDE TRIM COVER (w/o Deck Rail)

    Click here

  14. REMOVE ROPE HOOK ASSEMBLY (w/o Deck Rail)

    Click here

  15. REMOVE DECK FLOOR BOX LH

    Click here

  16. REMOVE REAR FLOOR FINISH PLATE

    Click here

  17. REMOVE FRONT DECK FLOOR BOX

    Click here

  18. REMOVE REAR DOOR SCUFF PLATE LH

    Click here

  19. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Tech Tips

    Partially remove the rear door opening trim weatherstrip LH so that the deck trim side panel can be removed Click here.

  20. REMOVE BACK DOOR WEATHERSTRIP

    Tech Tips

    Partially remove the back door weatherstrip so that the deck trim side panel can be removed Click here.

  21. REMOVE INNER ROOF SIDE GARNISH CAP LH

    Click here

  22. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

  23. REMOVE INNER ROOF SIDE GARNISH LH

    Click here

  24. REMOVE QUARTER WINDOW ASSEMBLY LH

    A005368E01
    Text in Illustration
    *1 Protective Tape

    Tech Tips

    Apply protective tape to the outer surface of the vehicle body to prevent scratches.

    Note

    When separating the quarter window glass from the vehicle, be careful not to damage the vehicle paint or interior/exterior ornaments.


    1. Disconnect the connectors.

    2. Using a knife, cut off the moulding as shown in the illustration.

      A0052FVE02
      Text in Illustration
      *1 Cut

      Note

      Be careful not to damage the vehicle body.

    3. A0052UHE02
      Text in Illustration
      *1 Piano Wire

      From the interior, insert a piano wire between the vehicle body and quarter window glass as shown in the illustration.

    4. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

    5. Cut through the adhesive by pulling the piano wire around the quarter window glass.

      Note

      Leave as much adhesive on the vehicle body as possible when removing the quarter window glass.

    6. Using suction cups, remove the quarter window glass.

  25. CLEAN VEHICLE BODY


    1. A0057AZE42
      Text in Illustration
      *1 Adhesive
      *2 Vehicle Body

      Clean and shape the contact surface of the vehicle body.


      1. On the contact surface of the vehicle body, use a knife to cut away excess adhesive as shown in the illustration.

        Note

        Be careful not to damage the vehicle body.

        Tech Tips

        Leave as much adhesive on the vehicle body as possible.

      2. Clean the contact surface of the vehicle body with cleaner.