POWER WINDOW REGULATOR MOTOR(for Front Door) INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL FRONT DOOR WINDOW REGULATOR ASSEMBLY LH

   
   

   1. Apply MP grease to the sliding and rotating areas of the window regulator.

      Note

      Do not apply grease to the spring of the window regulator.

   2. 

      Text in Illustration

      *1	Temporary bolt

      Temporarily install the temporary bolt to the window regulator.

   3. Insert the window regulator into the door panel. Use the temporary bolt to hang the window regulator on the door panel.

      Note

      Be careful not to drop the window regulator as it may become damaged.

   4. Temporarily install the window regulator with the 5 bolts.

   5. Tighten the 6 bolts.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

2. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY LH

   Click here

3. INSTALL FRONT DOOR SERVICE HOLE COVER LH

   Click here

4. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY

   Click here

5. INSTALL DOOR FRAME GARNISH LH

   Click here

6. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP LH

   Click here

7. INSTALL FRONT DOOR INSIDE HANDLE SUB-ASSEMBLY LH

   Click here

8. INSTALL COURTESY LIGHT ASSEMBLY

   Click here

9. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

   Click here

10. INSTALL FRONT DOOR NO. 1 STIFFENER CUSHION

    Click here

11. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

    Click here

12. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

    Click here

13. INSTALL ASSIST GRIP COVER LH

    Click here

14. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH

    Click here

15. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.