WINDOW DEFOGGER WIRE REPAIR

PROCEDURE


  1. REPAIR DEFOGGER WIRE

    A0058AOE04
    Text in Illustration
    *1 Repair Point
    *2 Broken Wire
    *3 Masking Tape

    1. Clean the broken wire tips with grease, wax and silicone remover.

    2. Place masking tape along both sides of the wire.

    3. Thoroughly mix the repair agent.

      DuPont paste
      No. 4817 or equivalent
    4. A0053Z5E04
      Text in Illustration
      *1 Repair Point
      *2 Fine Tip Brush

      Using a fine tip brush, apply a small amount of the agent to the wire.

    5. After a few minutes, remove the masking tape.

      Note

      Do not allow electricity to flow in the defogger wire for at least 24 hours.