ROOF HEADLINING(for Wagon) DISASSEMBLY

PROCEDURE


  1. REMOVE VANITY LIGHT ASSEMBLY

    Click here

  2. REMOVE NO. 1 ROOF SILENCER PAD (w/o Roof Sunshade System)

    A0054S6

    1. Remove the 3 No. 1 roof silencer pads.

  3. REMOVE NO. 2 ROOF SILENCER PAD (w/o Roof Sunshade System)

    A0053T4

    1. Remove the 2 No. 2 roof silencer pads.

  4. REMOVE NO. 3 ROOF SILENCER PAD (w/o Roof Sunshade System)

    A005569

    1. Remove the No. 3 roof silencer pad.

  5. REMOVE CENTER ROOF HEADLINING PAD (w/o Roof Sunshade System)

    A0056TH

    1. Remove the 2 center roof headlining pads.

  6. REMOVE ROOF HEADLINING PAD END

    A0053LZ

    Tech Tips

    Use the same procedure for both roof headlining pad ends.


    1. Remove the roof headlining pad end.

  7. REMOVE NO. 1 ROOF WIRE


    1. w/o Roof Sunshade System:


      1. Turn the visor connectors approximately 90° clockwise and remove them from the roof headlining.

      2. Remove each piece of tape and the No. 1 roof wire.

        A00571IE02
        Text in Illustration
        *A for LHD *B for RHD
        *C w/ Rain Sensor *D w/ Pre-crash Safety System
        *E w/ EC Mirror *F w/ Camera Heater
        *1 Visor Connector *2 Tape

    2. w/ Roof Sunshade System:


      1. Turn the visor connectors approximately 90° clockwise and remove them from the roof headlining.

      2. Remove each piece of tape and the No. 1 roof wire.

        A0053M4E02
        Text in Illustration
        *A for LHD *B for RHD
        *C w/ Rain Sensor *D w/ Pre-crash Safety System
        *E w/ EC Mirror *F w/ Camera Heater
        *1 Visor Connector *2 Tape

  8. REMOVE AMPLIFIER ANTENNA ASSEMBLY

    Click here