ROOF HEADLINING(for Sedan) REASSEMBLY

PROCEDURE


  1. INSTALL AMPLIFIER ANTENNA ASSEMBLY

    Click here

  2. INSTALL NO. 1 ROOF WIRE


    1. Fix the No. 1 roof wire in place by wrapping tape around the No. 1 roof wire and the protrusion of the roof headlining as shown in the part of the illustration labeled A.

    2. Position the joint boxes as shown in the illustration and set the No. 1 roof wire on the roof headlining.

    3. Attach tape at the locations shown in the illustration to install the No. 1 roof wire.

      Tech Tips

      Apply sufficient pressure when placing tape.

    4. Turn the visor connectors approximately 90° clockwise to install them to the roof headlining.

      A005335E02
      Text in Illustration
      *A for LHD *B for RHD
      *C w/ Rain Sensor *D w/ Pre-crash Safety System
      *E w/ EC Mirror *F w/ Camera Heater
      *1 Tape *2 Marking Tape
      *3 Roof Headlining *4 No. 1 Roof Wire
      *5 Joint Box *6 Marking
      *7 Visor Connector - -

  3. INSTALL ROOF HEADLINING PAD

    A0053IFE01
    Text in Illustration
    *1 Silencer Marking

    1. Align the roof headlining pad with the silencer markings on the roof headlining and install the roof headlining pad using double-sided tape as shown in the illustration.

  4. INSTALL FRONT ROOF HEADLINING SIDE PAD

    A005375E02
    Text in Illustration
    *1 Silencer Marking

    1. Align the front roof headlining side pad with the silencer markings on the roof headlining and install the front roof headlining side pad using double-sided tape as shown in the illustration.

  5. INSTALL NO. 3 ROOF SILENCER PAD

    A0059EHE02
    Text in Illustration
    *1 Silencer Marking

    1. Align the No. 3 roof silencer pad with the silencer marking on the roof headlining and install the No. 3 roof silencer pad using double-sided tape as shown in the illustration.

  6. INSTALL NO. 2 ROOF SILENCER PAD

    A0056KAE02
    Text in Illustration
    *1 Silencer Marking

    1. Align the No. 2 roof silencer pads with the silencer markings on the roof headlining and install the 2 No. 2 roof silencer pads using double-sided tape as shown in the illustration.

  7. INSTALL NO. 1 ROOF SILENCER PAD

    A0057OFE02
    Text in Illustration
    *1 Silencer Marking

    1. Align the No. 1 roof silencer pads with the silencer markings on the roof headlining and install the 3 No. 1 roof silencer pads using double-sided tape as shown in the illustration.

  8. INSTALL VANITY LIGHT ASSEMBLY

    A0053F8

    Tech Tips

    Use the same procedure to install the vanity light on the other side.


    1. Attach the 3 claws to install the vanity light.