FRONT CONSOLE BOX(w/ Console Box Lid) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click here

  2. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  3. REMOVE NO. 3 BOX PANEL


    1. Place protective tape as shown in the illustration.

    2. Using a moulding remover, detach the 6 clips and remove the box panel.

      A0054TYE01
      Text in Illustration
      *1 Protective Tape - -

  4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  5. REMOVE INSTRUMENT PANEL FINISH PANEL END RH (for LHD)

    Click here

  6. REMOVE INSTRUMENT PANEL FINISH PANEL END RH (for RHD)

    Click here

  7. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)


    1. A00593N

      Twist the shift lever knob in the direction indicated by the arrow and remove it.

  8. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle and CVT)


    1. A00549V

      Twist the shift lever knob in the direction indicated by the arrow and remove it.

  9. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY (for Manual Transaxle)


    1. A0057BF

      Detach the cover.

    2. A0059D2

      Using a moulding remover B, detach the 2 claws.

    3. Detach the 6 clips and remove the console panel.

  10. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transaxle and CVT)


    1. A00593I

      Using a moulding remover B, detach the 2 claws.

    2. Detach the 6 clips.

    3. Remove the console panel and then disconnect the connector.

  11. REMOVE LOWER INSTRUMENT CLUSTER FINISH PANEL


    1. A00595A

      Using a moulding remover B, detach the 2 clips.

    2. A0056XVE01
      Text in Illustration
      *1 w/ Seat Heater System

      Remove the finish panel and then disconnect the connectors.

  12. REMOVE REAR CONSOLE BOX CUP HOLDER


    1. Remove the cup holder.

  13. REMOVE CONSOLE BOX CARPET


    1. Remove the 2 carpets.

  14. REMOVE CONSOLE BOX ASSEMBLY


    1. for Manual Transaxle:

      Remove the 2 screws.

    2. for Automatic Transaxle and CVT:

      Remove the 4 screws.

    3. Disconnect the connectors.

    4. Remove the 4 bolts and console box.

      A0053HGE05
      *1 for Manual Transaxle:
      *2 for Automatic Transaxle: