LOWER INSTRUMENT PANEL INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY


    1. Attach the claw to install the instrument panel.

    2. Attach the 10 clamps.

    3. Install the 2 bolts.

      A0055WE

    4. Install the screw.

    5. Install the screw <D>.

    6. Install the 2 bolts <B> and 8 screws <C>.

      A0052P6E01
      Text in Illustration
      *1 Bolt <B> *3 Screw <D>
      *2 Screw <C> - -
    7. A0059C7

      When replacing the lower instrument panel sub-assembly with a new one:


      1. Twist the ribs (the pieces used to maintain the shape of the panel) in the direction of the arrow in the illustration until it detaches from the instrument panel, and remove the rib.

  2. INSTALL COOLER (ROOM TEMPERATURE SENSOR) THERMISTOR (for Automatic Air Conditioning System)


    1. A0056MD

      Attach the 2 claws to install the thermistor.

    2. Connect the connector and aspirator hose.

  3. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

    Click here

  4. INSTALL FUEL LID OPENER SWITCH

    Click here

  5. INSTALL VSC OFF SWITCH (w/ VSC)

    Click here

  6. INSTALL HEADLIGHT SWIVEL MAIN SWITCH (w/ AFS)

    Click here

  7. INSTALL CLEARANCE WARNING ECU ASSEMBLY (w/ TOYOTA Parking Assist-sensor System)

    Click here

  8. INSTALL ENGINE SWITCH (for LHD with Entry and Start System)


    1. A0055UL

      Connect the connector.

    2. Attach the 2 claws to install the switch.

  9. INSTALL ELECTRIC PARKING BRAKE SWITCH ASSEMBLY

    Click here

  10. INSTALL GLOVE BOX LIGHT ASSEMBLY

    Click here

  11. INSTALL COWL SIDE TRIM BOARD LH

    Click here

  12. INSTALL COWL SIDE TRIM BOARD RH

    Click here

  13. INSTALL FRONT DOOR SCUFF PLATE LH

    Click here

  14. INSTALL FRONT DOOR SCUFF PLATE RH

    Click here

  15. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. A005699

      Attach the guide.

    2. Connect the connector.

    3. A0055IB

      Attach the 3 claws to install the under cover.

  16. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

    Click here

  17. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. A0056XB

      Attach the guide.

    2. Connect each connector.

    3. A0055I5

      Attach the claw to install the under cover.

    4. Install the 2 screws <A>.

  18. INSTALL COIN BOX ASSEMBLY


    1. A005528

      Attach the 2 hinges to install the coin box.

    2. A0052AU

      While pushing in the sides of the coin box as indicated by the arrows in the illustration, close the coin box to engage the 2 stoppers.

  19. INSTALL NO. 1 SWITCH HOLE BASE (for RHD)


    1. Connect the connectors.

    2. Attach the 3 claws and 4 clips to install the switch hole base.

      A0055VPE01
      *1 w/o Entry and Start System:
      *2 w/ Entry and Start System:

  20. INSTALL NO. 1 SWITCH HOLE BASE (for LHD)


    1. A00576U

      Connect the connectors.

    2. Attach the 2 claws and 4 clips to install the switch hole base.

  21. INSTALL AIR CONDITIONING CONTROL ASSEMBLY

    Click here

  22. INSTALL CONSOLE BOX ASSEMBLY

    Click here

  23. INSTALL CONSOLE BOX CARPET

    Click here

  24. INSTALL REAR CONSOLE BOX CUP HOLDER

    Click here

  25. INSTALL LOWER INSTRUMENT CLUSTER FINISH PANEL

    Click here

  26. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transaxle and CVT)

    Click here

  27. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY (for Manual Transaxle)

    Click here

  28. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle and CVT)

    Click here

  29. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)

    Click here

  30. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Audio)


    1. for Radio Receiver Type:

      Install the radio receiver assembly Click here.

    2. for Radio and Display Type:

      Install the radio receiver assembly Click here.

  31. INSTALL STEREO OPENING COVER WITH BRACKET (w/o Audio)


    1. A00536D

      Install the opening cover with bracket with the 4 screws.

  32. INSTALL COMBINATION SWITCH ASSEMBLY WITH SPIRAL CABLE SUB-ASSEMBLY

    Click here

  33. INSTALL TILT AND TELESCOPIC SWITCH (for Power Tilt and Power Telescopic Steering Column)

    Click here

  34. INSTALL UPPER STEERING COLUMN COVER (for Power Tilt and Power Telescopic Steering Column)

    Click here

  35. INSTALL LOWER STEERING COLUMN COVER (for Power Tilt and Power Telescopic Steering Column)

    Click here

  36. INSTALL LOWER NO. 2 STEERING COLUMN COVER (for Power Tilt and Power Telescopic Steering Column)

    Click here

  37. INSTALL UPPER STEERING COLUMN COVER (for Manual Tilt and Manual Telescopic Steering Column)

    Click here

  38. INSTALL LOWER STEERING COLUMN COVER (for Manual Tilt and Manual Telescopic Steering Column)

    Click here

  39. INSTALL STEERING WHEEL ASSEMBLY


    1. Install the steering wheel assembly Click here.

  40. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY


    1. Install the upper instrument panel sub-assembly Click here.

  41. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  42. RESTORE AUTOAWAY/RETURN FUNCTION (for Power Tilt and Power Telescopic Steering Column)


    1. Restore the Autoaway/Return function setting to the previous condition by changing the customize parameter Click here.

  43. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.