REAR SEAT OUTER BELT ASSEMBLY(for Wagon) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR BENCH TYPE SEAT CUSHION ASSEMBLY

    Click here

  2. REMOVE REAR SIDE SEATBACK ASSEMBLY LH

    A00581C

    1. Remove the bolt and disconnect the outer belt anchor.

    2. A0057FE

      Using a screwdriver, detach the claw to open the cap of the rear seat shoulder belt guide.

    3. Remove the seat belt from the belt guide.

    4. A0055X7

      Remove the bolt and side seatback LH.

  3. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

  4. REMOVE ROOM PARTITION NET ASSEMBLY (w/ Partition Net)

    Click here

  5. REMOVE LOWER DECK TRIM SIDE BOARD LH (w/ Partition Board)

    Click here

  6. REMOVE DECK BOARD ASSEMBLY

    Click here

  7. REMOVE DECK BOARD SUB-ASSEMBLY

    Click here

  8. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY

    Click here

  9. REMOVE REAR DECK FLOOR BOX

    Click here

  10. REMOVE FLOOR SIDE RAIL LH (w/ Deck Rail)

    Click here

  11. REMOVE NO. 2 DECK SIDE TRIM COVER (w/o Deck Rail)

    Click here

  12. REMOVE NO. 6 DECK SIDE TRIM COVER (w/o Deck Rail)

    Click here

  13. REMOVE ROPE HOOK ASSEMBLY (w/o Deck Rail)

    Click here

  14. REMOVE DECK FLOOR BOX LH

    Click here

  15. REMOVE REAR FLOOR FINISH PLATE

    Click here

  16. REMOVE REAR DOOR SCUFF PLATE LH

    Click here

  17. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Tech Tips

    Partially remove the rear door opening trim weatherstrip LH so that the deck trim side panel LH can be removed Click here.

  18. REMOVE BACK DOOR WEATHERSTRIP


    1. Partially remove the back door weatherstrip so that the deck trim side panel LH can be removed Click here.

  19. REMOVE INNER ROOF SIDE GARNISH CAP LH

    Click here

  20. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

  21. REMOVE REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH

    A00597Y

    1. Remove the nut and 3 point type belt.

  22. REMOVE OUTER BELT ANCHOR BRACKET SUB-ASSEMBLY LH

    A0057VJ

    1. Remove the 2 bolts and anchor bracket.

      Tech Tips

      The bolt indicated by the arrow in the illustration cannot be removed from the bracket.