REAR SEAT INNER BELT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH

    A0056EZE01
    Text in Illustration
    *1

    Component without harness connected

    (Rear Seat Inner Belt)

    		 *3 Connector B
    *2 Connector A - -

    1. Check the buckle switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        A1 - A2 Outside Seat Inner Belt fastened 1 MΩ or higher
        Outside Seat Inner Belt unfastened Below 1 Ω
        B1 - B2 Center Seat Inner Belt fastened 1 MΩ or higher
        Center Seat Inner Belt unfastened Below 1 Ω

        If the result is not as specified, replace the inner with center belt assembly.

  2. INSPECT REAR SEAT INNER BELT ASSEMBLY RH

    A0057Y2E02
    Text in Illustration
    *1

    Component without harness connected

    (Rear Seat Inner Belt)

    1. Check the buckle switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Seat belt fastened 1 MΩ or higher
        Seat belt unfastened Below 1 Ω

        If the result is not as specified, replace the inner belt assembly.