METER / GAUGE SYSTEM CUSTOMIZE PARAMETERS

CUSTOMIZE METER / GAUGE SYSTEM

1. Customizing with the GTS

   
   

   1. Connect the GTS to the DLC3.

   2. Turn the ignition switch to ON.

   3. Turn the GTS on.

   4. Enter the following menus: Customize Setting / Warning or Display.

   5. Select the setting by referring to the table below.

      Note

      Be sure to record the current value before customizing.

      Warning

      Display	Default	Description	Setting
      Key Remind Sound*1	Slow	Function to change the cycle of the key remind buzzer	Normal, Slow or Fast
      Driver Side Seatbelt Warning Buzzer*2	ON	Function to turn on/off the seat belt warning buzzer	ON or OFF
      P-Seatbelt Warning Buzzer*2	ON	Function to turn on/off the seat belt warning buzzer	ON or OFF
      Rear Seatbelt Warning Buzzer*2	ON	Function to turn on/off the seat belt warning buzzer	ON or OFF
      Lane Change Flashing Times Setting	3	Function to change the lane change flashing times	OFF, 3, 4, 5, 6 or 7

      
      

      • *1: w/o Entry and Start System

      • *2: This setting is only valid for the buzzer which sounds at 20 km/h (12 mph) or more.

      Display

      Display	Default	Description	Setting
      ECO Drive Indicator Light*1	ON	Function to enable or disable the eco driving indicator light	ON or OFF
      ECO Drive Indicator Zone*2	ON	Function to enable or disable the eco driving indicator zone display in the multi-information display	ON or OFF
      ODO Display Time After IG OFF Setting	30s	Function to change the ODO display time after the ignition switch is turned off	30s, 60s, 600s or OFF

      
      

      • *1: except Manual Transaxle

      • *2: for CVT

2. Customizing with the combination meter assembly (for Multi-information Display [Color Type])

   
   

   1. Turn the ignition switch to ON.

   2. Enter the following menus: Settings Tab.

   3. Select the setting by referring to the table below.

      Note

      Be sure to record the current value before customizing.

      Settings Tab

      Meter Display	Default	Description	Setting
      Time Adjustment	-	Function to change the time on the display	-
      Instrument Panel Light	-	Function to change the brightness	-
      Language	English	Function to change the language on the display	English, German, French, Spanish, Italian, Portuguese, Dutch, Swedish, Norwegian, Danish, Russian, Finnish, Greek, Polish, Ukrainian, Turkish, Hungarian, Czech, Slovak or Romanian

   4. Enter the following menus: Settings Tab / Settings.

   5. Select the setting by referring to the table below.

      Note

      Be sure to record the current value before customizing.

      Settings

      Meter Display	Default	Description	Setting
      Eco Driving Indicator Light*1	ON	Function to activate/ deactivate the eco driving indicator light	ON or OFF
      Drive Info 1	Current Fuel Economy (Bar Type) Average Fuel Economy (After Reset)	Function to change the item to be displayed on Drive Info 1	Current Fuel Economy (Bar Type) Current Fuel Economy (Value Type) Average Fuel Economy (After Reset) Average Fuel Economy (After Start) Average Fuel Economy (After Refuel) Average Speed (After Reset) Average Speed (After Start) Elapsed Time (After Reset) Elapsed Time (After Start) Distance (Range) Distance (After Start) Other (Blank)
      Drive Info 2	Average Speed (After Reset) Distance (Range)	Function to change the item to be displayed on Drive Info 2	Current Fuel Economy (Bar Type) Average Fuel Economy (After Reset) Average Fuel Economy (After Start) Average Fuel Economy (After Refuel) Average Speed (After Reset) Average Speed (After Start) Elapsed Time (After Reset) Elapsed Time (After Start) Distance (Range) Distance (After Start) Other (Blank)
      Pop-up Display	-	Function to change the interrupt display setting of each item	-
      Initialize display	-	The setting items can be initialized	-
      Setup*2	-	Press and hold the steering pad switch assembly to perform initialization	-

      
      

      • *1: except Manual Transaxle

      • *2: w/ Tire Pressure Warning System

   6. w/ Road Signal Assist System:

      Enter the following menus: Settings Tab / Settings / Road Sign Assist Setup.

   7. Select the setting by referring to the table below.

      Note

      Be sure to record the current value before customizing.

      Road Sign Assist Setup

      Display	Default	Content	Setting
      Notification Method	Only Visual	Speed limit exceeded notification method setting	No Notification, Only Visual or Visual and Audible
      Excess Speed	2 km/h (1 mph)	Speed limit exceeded notification level setting*	10 km/h (5 mph), 5 km/h (3 mph) or 2 km/h (1 mph)
      Other Notifications	Only Visual	No overtaking notification method setting	No Notification, Only Visual or Visual and Audible

      
      

      • *: When the speed unit settings of the meter are changed, the displayed unit also changes.

   8. Enter the following menus: Settings Tab / Settings / Units.

   9. Select the setting by referring to the table below.

      Note

      Be sure to record the current value before customizing.

      Units

      Meter Display	Default	Description	Setting
      km, mile	km(km/L)	Function to change the units on the display	km(km/L), km(L/100km), mile (MPG)
      °C, °F	°C	Function to change the units on the display	°C, °F

3. Customizing with the combination meter assembly (for Multi-information Display [Monochrome Type])

   
   

   1. While on the "SETTINGS" screen of the multi-information display, pressing and holding the DISP switch in the steering pad switch assembly switches to customization mode.

      Display	Default	Description	Setting
      CLOCK	-	Function to change the time on the display	-
      CLOCK FORMAT	-	Function to change the time on the display	-
      LANGUAGE	English	Function to change the language on the display	English, French, Germany, Spanish, Italian, Russian, Portuguese or Turkish
      UNIT	km (km/L)	Function to enable or disable the eco driving indicator zone display in the multi-information display	km (km/L), km (L/100 km) or miles (MPG)
      ECO INDICATOR*	ON	Function to activate/deactivate the eco driving indicator light	ON or OFF

      
      

      • *: except Manual Transaxle