CHECK MAIN BODY ECU (INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY)
Disconnect the D79, D80, D81, DB, DE and DG ECU connectors.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| D79-4 (BATB) - Body ground | BR - Body ground | Battery power supply | Always | 11 to 14 V |
| DG-1 (ALTB) - Body ground | W - Body ground | Battery power supply | Always | 11 to 14 V |
| DB-30 (BECU) - Body ground | W - Body ground | Power supply | Always | 11 to 14 V |
| DE-17 (GND1) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
| D80-4 (GND2) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
| D81-11 (HCTY) - Body ground | R - Body ground | Engine hood courtesy switch | Engine hood closed | Below 1 Ω |
| Engine hood open | 10 kΩ or higher |
If the result is not as specified, there may be a malfunction on the wire harness side.
Reconnect the D79, D80, D81, DB, DE and DG ECU connectors.
Measure the voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| DA-21 (DCTY)*1 - Body ground DC-6 (DCTY)*2 - Body ground |
W*1 - Body ground SB*2 - Body ground |
Driver side door courtesy light switch input | Driver side door open | Below 1 V |
| Ignition switch off and driver side door courtesy light switch off | 11 to 14 V | |||
| DE-20 (PCTY)*1 - Body ground DA-24 (PCTY)*2 - Body ground |
Y*1 - Body ground W*2 - Body ground |
Front passenger side door courtesy light switch input | Front passenger side door open | Below 1 V |
| Ignition switch off and passenger side door courtesy light switch off | 11 to 14 V | |||
| D79-8 (LCTY) - Body ground | SB - Body ground | Rear door LH courtesy light switch input | Rear door LH open | Below 1 V |
| Ignition switch off and rear LH side door courtesy light switch off | 11 to 14 V | |||
| DE-19 (RCTY) - Body ground | LG - Body ground | Rear door RH courtesy light switch input | Rear door RH open | Below 1 V |
| Ignition switch off and rear RH side door courtesy light switch off | 11 to 14 V | |||
| DA-7 (LGCY) - Body ground*3 DA-7 (BCTY) - Body ground*4 |
LG - Body ground | Luggage compartment door*3 or back door*4 courtesy light switch input | Luggage compartment door*3 or back door*4 open | Below 1 V |
| Engine switch off and luggage compartment door*3 or back door*4 closed | 11 to 14 V | |||
| DH-7 (L2) - Body ground | SB - Body ground | Driver side door lock key switch input | Driver side door key cylinder lock position | Below 1 V |
| Ignition switch off, all doors closed and driver side door key cylinder neutral position | Pulse generation (see waveform 1 or 2) |
|||
| D79-25 (LSWD) - Body ground | GR - Body ground | Driver side door lock position switch input | Driver side door unlocked | Below 1 V |
| Ignition switch off, all doors closed and driver side door locked | Pulse generation (see waveform 3 or 4) |
|||
| D79-10 (LSWP) - Body ground | LG - Body ground | Front passenger side door lock position switch input | Front passenger side door unlocked | Below 1 V |
| Ignition switch off, all doors closed and passenger side door locked | Pulse generation (see waveform 5 or 6) |
|||
| D81-10 (LSR) - Body ground | Y - Body ground | Rear door lock position switch input | Rear door unlocked | Below 1 V |
| Ignition switch off, all doors closed and rear door locked | Pulse generation (see waveform 7 or 8) |
|||
| D79-12 (BDSU) - Body ground | V - Body ground | Back door opener switch input | Back door opener switch off | Below 1 V |
| Back door opener switch on | Pulse generation (see waveform 9 or 10) | |||
| D79-15 (IND) - Body ground | Y - Body ground | Security indicator signal | Security indicator illuminates (illuminates only for 60 sec. in alarm sounding state (blinking when system in armed state)) | 3 to 6 V |
| D80-6 (SSCL) - Body ground | R - Body ground | Theft warning siren (self power siren) signal | Theft warning siren (self power siren) sounding (theft warning system in alarm sounding state) | Below 2 V |
| Theft warning siren (self power siren) not sounding (theft warning system in alarm sounding state) | 4.5 to 14 V | |||
| D80-7 (ISIF) - Body ground*5 | G - Body ground | Intrusion sensor signal input | No moving object detected | 6.5 to 14 V |
| Moving object detected during arming preparation state or armed state | Pulse generation (see waveform 11) | |||
| D80-8 (SSW1) - Body ground*5 | Y - Body ground | Intrusion sensor cancel switch signal | Intrusion sensor cancel switch on | Below 1.5 V |
| Intrusion sensor cancel switch off | 4.5 to 14 V | |||
| D81-8 (GBS) - Body ground*6 | G - Body ground | Glass breakage sensor signal | Glass breakage sensor normal | Below 2 V |
| Glass breakage sensor malfunctioning | 4.5 to 14 V |
*1: for LHD
*2: for RHD
*3: for Sedan
*4: for Wagon
*5: w/ Intrusion Sensor
*6: w/ Glass Breakage Sensor
If the result is not as specified, the ECU may have a malfunction.
Using an oscilloscope, check waveform 1.
| Item | Content |
|---|---|
| Terminal No. (Symbol) | DH-7 (L2) - Body ground |
| Tool Setting | 5 V/DIV., 20 ms/DIV. |
| Condition | Ignition switch off, all doors closed and driver side door key cylinder neutral position |
Using an oscilloscope, check waveform 2.
| Item | Content |
|---|---|
| Terminal No. (Symbol) | DH-7 (L2) - Body ground |
| Tool Setting | 5 V/DIV., 20 ms/DIV. |
| Condition | Ignition switch off, all doors closed and driver side door key cylinder neutral position |
Using an oscilloscope, check waveform 3.
| Item | Content |
|---|---|
| Terminal No. (Symbol) | D79-25 (LSWD) - Body ground |
| Tool Setting | 5 V/DIV., 20 ms/DIV. |
| Condition | Ignition switch off, all doors closed and driver side door locked |
Using an oscilloscope, check waveform 4.
| Item | Content |
|---|---|
| Terminal No. (Symbol) | D79-25 (LSWD) - Body ground |
| Tool Setting | 5 V/DIV., 20 ms/DIV. |
| Condition | Ignition switch off, all doors closed and driver side door locked |
Using an oscilloscope, check waveform 5.
| Item | Content |
|---|---|
| Terminal No. (Symbol) | D79-10 (LSWP) - Body ground |
| Tool Setting | 5 V/DIV., 20 ms/DIV. |
| Condition | Ignition switch off, all doors closed and passenger side door locked |
Using an oscilloscope, check waveform 6.
| Item | Content |
|---|---|
| Terminal No. (Symbol) | D79-10 (LSWP) - Body ground |
| Tool Setting | 5 V/DIV., 20 ms/DIV. |
| Condition | Ignition switch off, all doors closed and passenger side door locked |
Using an oscilloscope, check waveform 7.
| Item | Content |
|---|---|
| Terminal No. (Symbol) | D81-10 (LSR) - Body ground |
| Tool Setting | 5 V/DIV., 20 ms/DIV. |
| Condition | Ignition switch off, all doors closed and rear door RH locked |
Using an oscilloscope, check waveform 8.
| Item | Content |
|---|---|
| Terminal No. (Symbol) | D81-10 (LSR) - Body ground |
| Tool Setting | 5 V/DIV., 20 ms/DIV. |
| Condition | Ignition switch off, all doors closed and rear door RH locked |
Using an oscilloscope, check waveform 9.
| Item | Content |
|---|---|
| Terminal No. (Symbol) | D79-12 (BDSU) - Body ground |
| Tool Setting | 5 V/DIV., 20 ms/DIV. |
| Condition | Ignition switch off, all doors closed and back door opener switch on |
Using an oscilloscope, check waveform 10.
| Item | Content |
|---|---|
| Terminal No. (Symbol) | D79-12 (BDSU) - Body ground |
| Tool Setting | 5 V/DIV., 20 ms/DIV. |
| Condition | Ignition switch off, all doors closed and back door opener switch on |
Using an oscilloscope, check waveform 11.
| Item | Content |
|---|---|
| Terminal No. (Symbol) | D80-7 (ISIF) - Body ground |
| Tool Setting | 2 V/DIV., 500 ms/DIV. |
| Condition | Moving object detected during arming preparation state or armed state |