DOOR CONTROL RECEIVER(for Sedan) REMOVAL

PROCEDURE


  1. REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY

    Click here

  2. REMOVE REAR SIDE SEATBACK ASSEMBLY LH

    Click here

  3. REMOVE REAR SIDE SEATBACK ASSEMBLY RH

    Click here

  4. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade)

    Click here

  5. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade)

    Click here

  6. REMOVE NO. 1 ROOM PARTITION BOARD

    Click here

  7. REMOVE DOOR CONTROL RECEIVER

    A005634E02
    *1 w/ Entry and Start System:
    *2 w/o Entry and Start System:

    1. Disconnect the connector.

    2. Remove the bolt and receiver.