ULTRASONIC SENSOR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL NO. 3 ULTRASONIC SENSOR RETAINER


    1. for Wagon:


      1. A0055ZU

        Attach the claw to the rear bumper cover to install the No. 3 ultrasonic sensor retainer.

    2. for Sedan:


      1. A0056ES

        Attach the claw to the rear bumper cover to install the No. 3 ultrasonic sensor retainer.

  2. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER


    1. for Wagon:

      Tech Tips

      Use the same procedure for both No. 2 ultrasonic sensor retainers.


      1. A0055GQ

        Attach the 2 claws to the rear bumper cover to install the No. 2 ultrasonic sensor retainer.

    2. for Sedan:

      Tech Tips

      Use the same procedure for both No. 2 ultrasonic sensor retainers.


      1. A0056ES

        Attach the claw to the rear bumper cover to install the No. 2 ultrasonic sensor retainer.

  3. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER


    1. A0055ZU

      for Wagon:

      Attach the claw to the rear bumper cover to install the No. 1 ultrasonic sensor retainer.

    2. A0059JJ

      for Sedan:

      Attach the claw to the rear bumper cover to install the No. 1 ultrasonic sensor retainer.

  4. INSTALL ULTRASONIC SENSOR CLIP (for Center)


    1. A0053MR

      for Wagon:

      Attach the ultrasonic sensor clip to the ultrasonic sensor retainer from the backside of the bumper. Then attach the 2 claws of the clip to install the clip.

      Tech Tips

      Use the same procedure for the other ultrasonic sensor clip.

    2. A0055VU

      for Sedan:

      Attach the ultrasonic sensor clip to the ultrasonic sensor retainer from the backside of the bumper. Then attach the 2 claws of the clip to install the clip.

      Tech Tips

      Use the same procedure for the other ultrasonic sensor clip.

  5. INSTALL ULTRASONIC SENSOR CLIP (for RH Side and LH Side)


    1. A0053MR

      for Wagon:

      Attach the ultrasonic sensor clip to the ultrasonic sensor retainer from the backside of the bumper. Then attach the 2 claws of the clip to install the clip.

    2. for Sedan:

      Attach the ultrasonic sensor clip to the ultrasonic sensor retainer from the backside of the bumper. Then attach the 2 claws of the clip to install the clip.

      A00551VE02
      Text in Illustration
      *A for RH Side *B for LH Side

  6. INSTALL NO. 1 ULTRASONIC SENSOR


    1. for Wagon:

      Tech Tips

      Use the same procedure for all No. 1 ultrasonic sensors.


      1. A0054CH

        Attach the No. 1 ultrasonic sensor to the ultrasonic sensor clip from the backside of the bumper. Then attach the 2 claws of the sensor to install the sensor.

      2. A0054BJ

        Connect the connector.

      3. A0057BS

        Attach the 2 clamps.

    2. for Sedan:


      1. A0057XQ

        for RH Side:

        Attach the No. 1 ultrasonic sensor to the ultrasonic sensor clip from the backside of the bumper. Then attach the 2 claws of the sensor to install the sensor.

      2. A0052K4

        except RH Side:

        Tech Tips

        Use the same procedure for all No. 1 ultrasonic sensors.

        Attach the No. 1 ultrasonic sensor to the ultrasonic sensor clip from the backside of the bumper. Then attach the 2 claws of the sensor to install the sensor.

      3. A00593UE02
        Text in Illustration
        *1 for RHD
        *1 for LHD

        Attach the 3 clamps.

  7. INSTALL REAR BUMPER COVER (for Sedan)


    1. Install the rear bumper cover Click here.

  8. INSTALL REAR BUMPER COVER (for Wagon)


    1. Install the rear bumper cover Click here.